Door drive, 230 V AC powered for 24 V DC motors with encoder, equipped with numeric keypad (TST800)
OPR520
DOORS CONTROL / Cartes opérateur
— Power supply 230 V AC.
— For 24 V DC Motors (max 120W).
— Integrated numerico keypad (TST800).
— Directly connection to B-Lift240
— Wi-Fi module on board to use the VisualDoors App.
— Metal box with screen-printed plastic cover. Power supply voltage, 230 V AC.
— For 24 V DC motors with encoder.
— 3 RELAY OUTPUTS (double contact NO and NC): Opened / Closed / Obstruction.
— INPUT dry contacts, or external voltage 24 V DC: Open / Close / Nudge / Temp (for NTC equipped motors – optional).
— Integrated numeric keypad for programming the parameters.
— By a direct connection to Vega light curtains B-LIFT240, the device performs security tests and it can be autonomously compliant with the EN81-20/50 (low energy closing and acoustic signal in case of failure or deactivation of the protective device).
— Possibility to have the WiFi module on board to use the VisualDoors APP for only Android smartphones.
— Possibility to use an external keypad for programming the parameters.
— Software upgrade by keypad.
— Emergency power supply input connector (optional).
VisualDoors is the Vega APP for door operator to program all the parameters of the board, having the possibility to monitor the status of the door, the commands of the control panel and any alarms without having access above the car. You also have the possibility to check the door profile of the door, comparing the reference data programmed by the user with the real data.
VisualDoors allows you to monitor the door drive important parameters in every position, by intuitively combinig 3 values:
1. REFERENCE SPEED (green line).
2. EFFECTIVE SPEED (red line).
3. CURRENT (blu line)
Any current peaks in specific positions indicate clearly mechanical problems or dysfunctions.
The “VisualDoors” APP can be downloaded from PLAYSTORE.
Mise à la terre
Vous avez choisi d’installer les produits électroniques Vega sur une plaque métallique ?
Attention : connectez les plaques au système de mise à la terre. Cela permet d’éviter tout dysfonctionnement ou endommagement des appareils électroniques.
Nettoyage du produit
Comment nettoyer les boutons Vega ? À l’aide d’un chiffon en coton et de l’eau chaude.
Attention : n’utilisez pas de produits chimiques, en particulier pour les surfaces en plastique. De nombreux produits Vega sont fabriqués en polycarbonate, ABS, méthacrylate ou nylon 66. Évitez les produits de nettoyage contenant (même en petite partie) de l’ammoniac, des hydrocarbures, de la soude caustique, de l’acide chlorhydrique, de l’acide nitrique, de l’acide acétique, de l’alcool éthylique, de l’alcool méthylique.
