Door drive with 230 V AC power supply for synchronous motor up to 230 V with encoder, equipped with numeric keypad (TST800)

—   Power supply 110-230 V AC.
—   For synchronous motors up to 230V (max 120W).
—   Integrated numerico keypad (TST800).
—   Directly connection to B-Lift240.
—   Wi-Fi module on board to use the VisualDoors App.

—   Equipped with screen printed box.
—   230 V power supply with integrated switch.
—   For synchronous motors up to 230 V.
—   4 RELAY OUTPUTS (double contact NO and NC): Opened / Closed / Mechanical Obstruction / Photocell Obstruction.
—   INPUT dry contacts, or external voltage 24 V DC): Open / Close / Nudge / Rfu (on request for future use).
—   Integrated keypad with 2 Digit and 4 buttons for programming the parameters. By a direct connection to Vega light curtains B-LIFT240, the device performs security tests and it can be autonomously compliant with the EN81-20/50 (low energy closing and acoustic signal in case of failure or deactivation of the protective device).
—    Possibility to have the WiFi module on board to use the VisualDoors APP for Android smartphones.
—   Possibility to use an external keypad for programming the parameters. Software upgrade by keypad.
—   CAN bus communication (optional).

VisualDoors is the Vega APP for door operator to program all the parameters of the board, having the possibility to monitor the status of the door, the commands of the control panel and any alarms without having access above the car. You also have the possibility to check the door profile of the door, comparing the reference data programmed by the user with the real data.

VisualDoors allows you to monitor the door drive important parameters in every position, by intuitively combinig 3 values:
1. REFERENCE SPEED (green line).
2. EFFECTIVE SPEED (red line).
3. CURRENT (blu line)
Any current peaks in specific positions indicate clearly mechanical problems or dysfunctions.

The “VisualDoors” APP can be downloaded from PLAYSTORE.

Ligação à terra
Optou por instalar os produtos eletrónicos Vega numa placa metálica?
Atenção: ligar as placas ao sistema de ligação à terra. Deste modo, evita-se o mau funcionamento ou danos nos aparelhos eletrónicos.

Limpeza do produto
Como limpar os botões Vega? Com um pano de algodão e água morna.

Atenção: não utilizar produtos químicos, especialmente em superfícies de plástico. Muitos produtos Vega são fabricados em policarbonato, ABS, metacrilato ou nylon 66. Evitar produtos de limpeza que contenham (mesmo uma pequena quantidade de) amoníaco, hidrocarbonetos, soda cáustica, ácido clorídrico, ácido nítrico, ácido acético, álcool etílico, álcool metílico.